Protective Coatings Operational Concept

GLORY INTERLINK SDN BHD operation is mainly focused on steel blasting either by using abrasive medium such as copper grit and garnet, water jetting or auto blasting method and protective coating /painting system . The surface preparation and coating procedures shall be in accordance to the client’s specification and shall follow the standard of surface profile. A team of qualified and highly experienced staff and workers with up to 10 years in blasting and painting supports the company’s activities.
We are able to mobilize our equipment to clients specified location and we can also provide blasting area and will deliver finished products to customers.
In order to meet customer’s demands, GLORY INTERLINK SDN BHD workforce is able to operate 24 house a day on every calendar day if required, and with existing expertise, the company is responsible in meeting optimum standard and ensure high quality of products and work.
GLORY INTERLINK SDN BHD is committed in protecting the health and safety of its workers, and is responsible in ensuring that all workers have a healthy working environment and understand the importance of safety. For this, the company has incorporated a safety programmer.
The company is also aware of the importance of protecting the environment. The company shall ensure that yard needed for blasting and painting is secured and away from the residential area; and wastage especially hazardous blasting and coating medium shall be properly disposed of at authorized dumpsite.
Thus, this serves to facilitate close and direct liaison for productive and long term relationship with customers.
Specification For Surface Preparations
Our operations and products specifications is based on the following grades or surface finishes with reference:-
- Storage Tanks
- Weldon Shell
- Steel Structure
- Oil and Gas
- Warehouse
- Engineering
- Marine
Abrasive Blast Cleaning
A few example of suitable abrasives that we use for blast cleaning.
- Steel Grit
- Steel Shot
- Aluminum Oxide
- Copper slag
- Garnet
- Ps Ball
Coating Detail

Power Tooling Cleaning

General Execution Methods
All inspection shall be done with approved and calibrated inspection tools to ensure quality product.
.png)
Blasting Cleaning Method
Solvent cleaned material surface to remove grease and oil by using suitable cleaning agent in accordance to SSPC-SP

Paint Application Preparation
All paint shall be thoroughly stirred or mixed and applied within “pot life”
Application And Inspection Method
Method of Application
- Air spray – using conventional pot with built in stirrer
- Airless Spray
- Brush Application – when areas cannot be properly coated by spraying or touch up purposes
- Roller application – as per brush application
Inspection Methods
Hygrometer
- to confirm good atmospheric conditions
- at least reading show 3ºC above dew point or humidity below 85%.
Steel Temperature Gauge
- to ensure that material temperature not exceeding 40ºC to avoid dry spray
Wet Film Thickness Gauge
- to ensure adequate film thickness as per manufacturer´s requirement.
Dry Film Thickness Gauge
- to ensure the success of applied coating thickness